Code: 925
€259,16 / pcs €221,50 excl. VAT
In stock

2 x panels from which you can build at least 3 projects.

Faber as the very first introduction to vertical movement.

What can you build? Lovely wall bars with horizontal bar at 120 cm high or the Pikler triangle.

In a minute, you can easily remove all the panels from the wall and put them back just as quickly.

Detailed product description .. ↓ .. below.

REMINDER: Don't forget to order screws to secure the W1 connector to the wall. Please make sure to choose appropriate screws for your wall.  

Detailed information

Product detailed description

What can you build from this set? 

Wall bars 120 cm high Ι Wall bars with horizontal bar Ι Inclined wall bars Ι Pikler's triangle 54 cm high 


Check our photos for more inspiration

Sets are sold only with parts you need to build that specific project without any accessories. Enhance your project by adding some accessories from our wide range.


The picture below shows a small climbing wall that is tilted for easier and safer climbing. The following accessories are used:

2 x climbing board, 2 x set of climbing stones.


On the picture below you can see a small wall bars with horizontal bar enhanced with the following accessories: 1 x climbing rope, 2x inclined plane, 1 x SL1 plane connector including 35 mm bolt (you need 8 pcs), M1 small slide handles including 35 mm bolt (you need 4 pcs).


 At the bottom of the page you can find accessories suitable for this set as well as related products.


  • 100% massive beech with FSC certification
  • mortise joints, high tensile strength stainless screws
  • weight of the set: 5 kg
  • load bearing capacity: 150 kg
  • comply with ČSN EN 71 (Children's toys) 


  • no specific maintenance  is required
  • all you need is water and damp cloth

In the box

  • panel (2 pcs)
  • connector E1 (2 pcs)
  • connector T1 (2 pcs)
  • connector F1 (2 pcs)
  • connector W1 (1 pc)
  • strength strap (1 pc)
  • wooden rod with cotters (1 pc)
  • bolt 50 (2 pcs)
  • bolt 35 (8 pcs)
  • key (1 pc)

The set does not include screws to secure the W1 connector to the wall. Please make sure to choose appropriate screws for your wall.  



  • 5 years

Please read

Faber is a universal climbing frame and each part can be used for any project. Faber 3 set contains all the parts needed to assemble any of the structures shown above. Note that it is usually not possible to build several buildings at the same time from the available parts. Do you want to build more projects at the same time? Call us, we will pack the parts according to your needs.


Additional parameters

Category: Sets of building parts
Warranty: lifetime
Weight: 23 kg

Be the first who will post an article to this item!

Do not fill out this field: